Linksys Cisco N300, Model#E1200, V2 not working for FPL line

[tester2]

hi guys, i need your help, i bought a new Router "Linksys Cisco N300, Model#E1200, V2", so i configure for Wireless etc, so all the Devices working perfectly with wire & with out wire.

But when I connect my PAP2T with wire to this E1200 Router then my FPL Phone line not work at all.

But when I connect my PAP2T directly to Modem with wire then my FPL line work properly.

So i like to know "How to get work my FPL line on PAP2T with Linksys Cisco Router N300, Model#E1200, V2",

I tried many diffrent things, still not success at all.

So i like to know, How to get this FPL line with PAP2T with LATEST TECHNOLOGY ROUTERS to get it work.

Hopefully waiting for your replies.

Thanks

[Fongo Support]

hi guys, i need your help, i bought a new Router "Linksys Cisco N300, Model#E1200, V2", so i configure for Wireless etc, so all the Devices working perfectly with wire & with out wire.

But when I connect my PAP2T with wire to this E1200 Router then my FPL Phone line not work at all.

But when I connect my PAP2T directly to Modem with wire then my FPL line work properly.

So i like to know "How to get work my FPL line on PAP2T with Linksys Cisco Router N300, Model#E1200, V2",

I tried many diffrent things, still not success at all.

So i like to know, How to get this FPL line with PAP2T with LATEST TECHNOLOGY ROUTERS to get it work.

Hopefully waiting for your replies.

Thanks

Hi there,

Not sure if you saw the thread below but I think it might be worth reading:

http://forum.fongo.com/viewtopic.php?f= ... zlo#p46304

I am not sure if you used the "smart build in setup" or you choose manual setup when you configured your E1200.

Thanks,m

[tester2]

Fongo Support, thanks for your reply, i read that above thread, but i could not find any solution to this problem. if any suggations, please let me know, how to fix this issue.

I bought this router from the small shop, when i take this route to return it, he simply open the Router confiure on his Network & shows me Wireless working & Wired working, so he totally refuse to take it back/return (because this is not like a futureshop / wallmart), so i can't return this Router.

Because of this reasoin i want to utelize this router for my purpose. So if you know any thing about this, "HOW TO GET THIS ROUTER WORK FOR FPL PAP2T".

I appricate for your help.

Thanks

I appricate for your help.

[Fongo Support]

Fongo Support, thanks for your reply, i read that above thread, but i could not find any solution to this problem. if any suggations, please let me know, how to fix this issue.

I bought this router from the small shop, when i take this route to return it, he simply open the Router confiure on his Network & shows me Wireless working & Wired working, so he totally refuse to take it back/return (because this is not like a futureshop / wallmart), so i can't return this Router.

Because of this reasoin i want to utelize this router for my purpose. So if you know any thing about this, "HOW TO GET THIS ROUTER WORK FOR FPL PAP2T".

I appricate for your help.

Thanks

I appricate for your help.

Hi there,

I am really sorry that you couldn't get any help from that link.

What Laszlo did to resolve the issue, he did a manual setup rather than using the built in "smart setup feature"

On you router, this feature is called "Cisco connect"

http://kb.linksys.com/Linksys/ukp.aspx? ... _21480.xml

Please avoid using that feature and try to configure your router manually (the old way)

http://kb.linksys.com/Linksys/ukp.aspx? ... cleid=3686

If you have any troubles- you might need to reset to factory defaults and restart again.

Thanks,

[bridonca]

Oh my, your router is a piece of work! It has a feature called SIP ALG, which serve no purpose but to mess up SIP VOIP! You have to disable it! I would probably update the router to the latest firmware, or even better, to DD-WRT, which is more stable, and has features that actually work! It is nice to have a router with stable firmware. A shame that does not happen out of the box, even now.

Some solutions if you insist on using the old firmware.

Set the SIP port on your ATA to 5062, so you no longer have to deal with SIP ALG. Forward RTP ports 16384 -16482 from your router to your ATA, so you can get incoming audio. And pray the firmware is stable enough to do that. Or save yourself some hassle and flash the router to DD-WRT.