Cisco 7960 - No Incoming, Outgoing working fine

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
kornando
Just Passing Thru
Posts: 8
Joined: 06/03/2010
SIP Device Name: PAP2T
ISP Name: Rogers

Cisco 7960 - No Incoming, Outgoing working fine

Post by kornando »

Hi,
I have Cisco 7960 IP phone on SIP. i configure it and i am able to make calls, check voice messages. But no in coming calls, call goes to voice message.
i am using port 5060, NAT enable, NET gateway to default IP of router.

Do anyone know what i am missing here, or what could be the problem.

I also have LINKSYS PAP2T working on freephone line using port 5060 for four year. no problem with incoming and outgoing.