Caller ID not working on OBi202

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
curt
Active Poster
Posts: 94
Joined: 12/18/2014
SIP Device Name: OBi202
Firmware Version: 3.2.2 (Build: 8680EX
ISP Name: Bell
Computer OS: Mac OSX 12.0.1
Router: Asus RT-AC68U

Caller ID not working on OBi202

Post by curt »

On the OBihai 202, I cannot get the Caller ID to work. You can see details from my postings at:

http://www.obitalk.com/forum/index.php? ... 9#msg61819

Has anyone been able to get it to work on the OBihai 202? Does anyone have any suggestions or ideas?
Top
User avatar
Liptonbrisk
Technical Support
Posts: 3332
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 64 bit
Router: Asuswrt-Merlin & others

Re: Caller ID not working on OBi202

Post by Liptonbrisk »

curt wrote:
Has anyone been able to get it to work on the OBihai 202?
Yes, and both incoming and outgoing CID work perfectly fine with it and freephoneline.
Does anyone have any suggestions or ideas?
I would try a different model and brand of phone as someone else suggested in that thread.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at http://forum.fongo.com/viewforum.php?f=15.
Top
tango
Quiet One
Posts: 41
Joined: 01/25/2015
SIP Device Name: HT-801
ISP Name: Bell Fibe
Computer OS: Windows 10
Router: Bell Giga Hub

Re: Caller ID not working on OBi202

Post by tango »

curt wrote:On the OBihai 202, I cannot get the Caller ID to work. You can see details from my postings at:

http://www.obitalk.com/forum/index.php? ... 9#msg61819

Has anyone been able to get it to work on the OBihai 202? Does anyone have any suggestions or ideas?
I don't have the 202 device, just a humble 110 :). However, I went to OBi Expert Config and set it there. Then it stayed.

I suspect you can do the same.
Top

Return to “Community Support”