Been a while since I was here. But something is going on and I thought I would inquire.The phoneline was working fine yesterday. I thought it might be an outage but the ATA says the "Registration State:	Online" with "voip2.freephoneline.ca" everything seemed fine. But today when I try to make any outgoing call here's what happens;
Status lights all as they should be, dial tone working, enter number I wish to call. I hear it click then dead for a few minutes then a fast busy tone. 
Here's what the ATA says during a call:
                Display Name:	<REMOVED>	User ID:	<REMOVED>
		Hook State:	Off	Registration State:	Online
		Last Registration At:	12/22/2015 15:56:18	Next Registration In:	1930 s
		Message Waiting:	No	Call Back Active:	No
		Last Called Number:		Last Caller Number:	
		Mapped SIP Port:			
		Call 1 State:	Calling	Call 2 State:	Idle
		Call 1 Tone:	None	Call 2 Tone:	None
		Call 1 Encoder:	G711u	Call 2 Encoder:	
		Call 1 Decoder:	G711u	Call 2 Decoder:	
		Call 1 FAX:	No	Call 2 FAX:	
		Call 1 Type:	Outbound	Call 2 Type:	
		Call 1 Remote Hold:	No	Call 2 Remote Hold:	
		Call 1 Callback:	No	                Call 2 Callback:	
		Call 1 Peer Name:		        Call 2 Peer Name:	
		Call 1 Peer Phone:18007692511	Call 2 Peer Phone:	
		Call 1 Duration:		                Call 2 Duration:	
		Call 1 Packets Sent:	0	        Call 2 Packets Sent:	
		Call 1 Packets Recv:	0	        Call 2 Packets Recv:	
		Call 1 Bytes Sent:	0	        Call 2 Bytes Sent:	
		Call 1 Bytes Recv:	0	        Call 2 Bytes Recv:	
		Call 1 Decode Latency:0 ms       Call 2 Decode Latency:	
		Call 1 Jitter:	0 ms	                Call 2 Jitter:	
		Call 1 Round Trip Delay: 0 ms	Call 2 Round Trip Delay:	
		Call 1 Packets Lost:	0	        Call 2 Packets Lost:	
		Call 1 Packet Error:	0	        Call 2 Packet Error:	
		Call 1 Mapped RTP Port:	16388 >> 0
Any ideas?
			
			
									
						
										
						Calls not connecting
- 
				thanhdo
 - Just Passing Thru
 - Posts: 4
 - Joined: 02/05/2016
 - SIP Device Name: spa122
 - Firmware Version: 1.3.3 (015)
 - Computer OS: window 10
 - Router: Hitron CGN3
 
Re: Calls not connecting
i have this issue,
can you post it how to?
			
			
									
						
										
						can you post it how to?