Can't connect to login server, PAP2

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
biosfix
One Hit Wonder
Posts: 1
Joined: 04/20/2010
SIP Device Name: LINKSYS PAP2
Firmware Version: 3.1.12
ISP Name: ACANAC
Computer OS: windows xp

Can't connect to login server, PAP2

Post by biosfix »

I have used FPL for more than 6 months. It ran well until this month. Every time when I restart my PAP2, it takes long time to login FPL server (about 5 to 10 minutes). But another line connect to another VOIP provider just takes 2 seconds.
When it try to re-connect to server, the PAP2 info shows Can't connect to login server

And even ATA online (all LEDs are on), frequently I cannot dial any number for no reason.

I have re-checked the PDF config instruction on this forum, but no help.

It seems that the server is hard to login, and cut the connection shortly, and my ATA could not know that, still show me "online" LED.

-------------------------------------------------
Problem solved. Replace a DSL modem. G-NET is not nice to FPL. :mrgreen:
Top

Return to “Community Support”