Loose words/syllabes

Share your tips, tricks and best practise ideas for Fongo services in here!
balooba
Just Passing Thru
Posts: 12
Joined: 08/02/2009

Loose words/syllabes

Post by balooba »

While i'm talking, often loose words/syllabes from my respondant. Seems not to be related to time of the day. It happens all the time and very annoying,
Any parameter i should set up?
User avatar
Jake
Technical Support
Posts: 2837
Joined: 10/18/2009

Re: Loose words/syllabes

Post by Jake »

Sounds a lot like this thread http://forum.freephoneline.ca/viewtopic.php?f=8&t=1887

Some people are having the sound cut out for a split second. Maybe if this is happening to you, you could add your details (location, ATA/Softphone, area, etc) to try and hunt down the cause.
laurent
*Go-To Guy*
Posts: 532
Joined: 08/06/2010
SIP Device Name: Grandstream HT-502
Firmware Version: 1.0.1.63
ISP Name: DSL TekSavvy
Computer OS: OSX Snow Leopard
Router: Linksys WRT54GL w/tomato

Re: Loose words/syllabes

Post by laurent »

Typically, this is caused by your router not being set to give a high priority to voice traffic. Often called "QoS", it requires a certain level of technical knowledge to adjust. There's a few threads around for some router brands.

However, it's also possible your issue to one that seems to affect a group of people, as Jake pointed out.
balooba
Just Passing Thru
Posts: 12
Joined: 08/02/2009

Re: Loose words/syllabes

Post by balooba »

location: Quebec City
Area 418
Using a Linksys PAP2T version 3.1.15(LS)
ISP: Videotron
My ATA is connected to my router, not directly to my ISP connection.
Maybe i should upgrade my ATA version but i'm sceptical, cause this problem appeared suddenly 3 months ago; before, was very good.