Ghost call

Share your tips, tricks and best practise ideas for Fongo services in here!
laurent
*Go-To Guy*
Posts: 532
Joined: 08/06/2010
SIP Device Name: Grandstream HT-502
Firmware Version: 1.0.1.63
ISP Name: DSL TekSavvy
Computer OS: OSX Snow Leopard
Router: Linksys WRT54GL w/tomato

Ghost call

Post by laurent »

Today at 3:20 pm, my phone rang. I picked up before caller ID could show on my phone. There was dialtone. I figured that, by the time I picked up, the caller had hung up. So I head over the web page to check the call log: nothing.

Weird! How can the call log (even failed log) show nothing yet my phone did ring?
laurent
*Go-To Guy*
Posts: 532
Joined: 08/06/2010
SIP Device Name: Grandstream HT-502
Firmware Version: 1.0.1.63
ISP Name: DSL TekSavvy
Computer OS: OSX Snow Leopard
Router: Linksys WRT54GL w/tomato

Re: Ghost call

Post by laurent »

(Don't mind the incorrect log time, my server's a bit off.)

It looks like when FPL's server sent a notification to my ATA to inform that there was no messages waiting (because I listened to it a few minutes prior to that), my ATA freaked out and rang.

Oh well!

Code: Select all

Nov 20 15:01:07 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Received SIP request NOTIFY (0)
Nov 20 15:01:07 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Dispatching event: 37 (SIG_MWI) on port -1:-1
Nov 20 15:01:07 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Voice mail for acct 1: 0/0
Nov 20 15:01:11 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Vinetic::setMWI, Reset MWI on port 1
Nov 20 15:01:15 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Dispatching event: 3 (PHONE_OFF_HOOK) on port 1:0
Nov 20 15:01:15 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] ::processPhoneOffHook, port 1:0, status = CALL_IDLE/CALL_IDLE, reg'd:1, allow calls w/o reg:0
Nov 20 15:01:15 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Vinetic::stopTone, Stop tone on port 1, direction 0
Nov 20 15:01:15 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Vinetic::playTone, Play tone 34 on port 1, direction 1
Nov 20 15:01:15 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Phone at port 1 is off-hook
Nov 20 15:01:20 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Dispatching event: 2 (PHONE_ON_HOOK) on port 1:0
Nov 20 15:01:20 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] ATACtrl::processPhoneOnHook on port 1:0, status = CALL_IDLE/CALL_IDLE
Nov 20 15:01:20 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Vinetic::stopTone, Stop tone on port 1, direction 0
Nov 20 15:01:20 voip HT502: [00:0B:82:18:1A:2E][1.0.1.63] Phone at port 1 is on-hook