Hello,
I have few FPL numbers in different places and one of them, which I installed faraway , in different country, gives me a problem. Every few days (two-three I think ) it loosing the registration and to make it work , ATA has to be power cycled.
The ATA is standard Linksys PAP2-NA.
Can anybody suggest any tweak I could do in PAP to make work more stable ?
Thanks a lot
FPL disconnects after few days
-
qyo001
- Just Passing Thru
- Posts: 6
- Joined: 02/26/2010
- SIP Device Name: zoom
-
ebala
- Just Passing Thru
- Posts: 4
- Joined: 02/12/2013
- SIP Device Name: linksys spa3102
- Firmware Version: 3.3.6(GW)
- ISP Name: Start Communications
- Computer OS: win7
- Router: Dlink 524
Re: FPL disconnects after few days
i've had similar problems with the device needing to be reset every so often. i'm using a different device (SPA 3102) however the additional settings listed in this file seem to have fixed my incoming calls not ... coming in.
http://support.freephoneline.ca/entries ... redentials
http://support.freephoneline.ca/entries ... redentials