One way audio

[plojo]

Hello,
I have a Linksys SPA122 in bridge mode behind my Linksys WRT54G2 Router.
When I use my voip.ms account I have no problems with incoming or outgoing calls.
When I use my FPL account I have a one way audio problem. I can't hear the other line but they can hear me.
I tried searching for solutions but couldn't manage to find any.
Can anybody help !
Thanks !

[Fongo Support]

Hello,
I have a Linksys SPA122 in bridge mode behind my Linksys WRT54G2 Router.
When I use my voip.ms account I have no problems with incoming or outgoing calls.
When I use my FPL account I have a one way audio problem. I can't hear the other line but they can hear me.
I tried searching for solutions but couldn't manage to find any.
Can anybody help !
Thanks !

Hi there,

Are you going to use both providers on your spa122?
i.e voipms- line1 and fpl line2?

Please let me know.

Thanks,

[plojo]

Nope I want to set my FPL account on line1 and leave my line2 empty.
Having discovered this problem I tried my voip.ms account to see if it was a config problem on my end (router, NAT/Bridge, port forwarding) but since my voip.ms account is working I'm kind of lost on what the problem is.
Thanks for the help !

[Fongo Support]

Nope I want to set my FPL account on line1 and leave my line2 empty.
Having discovered this problem I tried my voip.ms account to see if it was a config problem on my end (router, NAT/Bridge, port forwarding) but since my voip.ms account is working I'm kind of lost on what the problem is.
Thanks for the help !

Hi there,

Please send me a PM with the FPL account and I will check it.

Thanks,

[suresh79]

I am helping out couple of my friends get fpl.

I have encountered this puzzling problem.
One of them has 2wire with bell and other one has Rogers’s internet with DPC3825 modem.
Both places I used pap2t ATA to connect FPL. Both places when they call out other side can hear them; but not caller. When inbound call come though; phone rings, but phone connected to ATA can't hear anything.

So I thought it might be the ATA and switch ATA to HT701. Same situation.

Funny thing is when I take the ATA to my home and I got teksavvy. It works fine.

I went back to the guy with the 2wire. DMZ ATA and have the same problem.

can some one help me please.
thank you.

[Fongo Support]

I am helping out couple of my friends get fpl.

I have encountered this puzzling problem.
One of them has 2wire with bell and other one has Rogers’s internet with DPC3825 modem.
Both places I used pap2t ATA to connect FPL. Both places when they call out other side can hear them; but not caller. When inbound call come though; phone rings, but phone connected to ATA can't hear anything.

So I thought it might be the ATA and switch ATA to HT701. Same situation.

Funny thing is when I take the ATA to my home and I got teksavvy. It works fine.

I went back to the guy with the 2wire. DMZ ATA and have the same problem.

can some one help me please.
thank you.

Hi there,

Please send me a PM with both accounts and I will have a look.

Thanks,

[plojo]

Hi, same problem this time with newly ported number and another Router/ATA combo.
Cable Modem ---> DLINK DIR 632 (DD-WRT) ---> Linksys PAP2T-NA
Please help !

[blackjack21]

I am also having issues with one way audio. I am able to receive some calls but I am not able to make any outgoing calls. I cant here anyone when I try calling, the phone doesn't even ring. I tried playing with the SIP settings to see if there would be any success but unfortunately there is not progress. My phone service with freephoneline did work for the first couple of months I had my phone number setup. Can someone from freephoneline please help me out. I am using the SPA-2102.

Thank you.