private call

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
newuser
Just Passing Thru
Posts: 11
Joined: 03/03/2013

private call

Post by newuser »

Hi,
How to make private call ?
*67 doesn't work.
Thanks.
Top
vq1
Quiet One
Posts: 31
Joined: 04/08/2011
SIP Device Name: SPA2102
ISP Name: Electronic Box
Computer OS: Windows 7
Router: DDWRT

Re: private call

Post by vq1 »

What SIP ATA box are you using? On my SPA2102, I need to set "Block CID Serv" = YES in order to block caller ID.
Top
newuser
Just Passing Thru
Posts: 11
Joined: 03/03/2013

private call

Post by newuser »

Hi,
I'm using Siemens Gigaset C610A IP :
http://www.gigaset.com/en_US/shop/gigaset-c610a-ip.html

This is nice phone with lots of features, but no such setting - "Block CID Serv".
Any suggestion please ,
Thanks.
Top
vq1
Quiet One
Posts: 31
Joined: 04/08/2011
SIP Device Name: SPA2102
ISP Name: Electronic Box
Computer OS: Windows 7
Router: DDWRT

Re: private call

Post by vq1 »

newuser wrote:Hi,
I'm using Siemens Gigaset C610A IP :
http://www.gigaset.com/en_US/shop/gigaset-c610a-ip.html

This is nice phone with lots of features, but no such setting - "Block CID Serv".
Any suggestion please ,
Thanks.
I took a read through some of the documentation on this phone, and it appears that it's not a feature that is supported on this phone set. Maybe the Fongo Support team can block something from the server side, but I am not sure I see a solution on your phone (client) side.


VQ
Top
User avatar
Jake
Technical Support
Posts: 2837
Joined: 10/18/2009

Re: private call

Post by Jake »

I had a look around, and do you have the "Select Services" menu? From what I have read the ones from US/Can don't seem to have it. Anyway digging through this (http://www.dslreports.com/forum/r273294 ... 0H-US-CAN-) thread, if you don't have it they came up with this (on page 7 if you want to read it there)
ok everyone, I have the procedure for re-instating the "Select Services" icon in the menu. This will work for the C610H add-on handsets you have where you notice that the menu looks different than the menu on the handset that came with the C610AIP system.

Get into the menu (right click silver 4-way navkey)

Type in *#7337#

Enter in the 15 digit string 52795 52281 52473

Press “ok” softkey on bottom right of screen.
This should give you access to a new menu that should allow you to do more as in the attached image (again taken from that thread).
thumb.jpg
Source, dslreports.
You do not have the required permissions to view the files attached to this post.
Top
vq1
Quiet One
Posts: 31
Joined: 04/08/2011
SIP Device Name: SPA2102
ISP Name: Electronic Box
Computer OS: Windows 7
Router: DDWRT

Re: private call

Post by vq1 »

Jake wrote:I had a look around, and do you have the "Select Services" menu? From what I have read the ones from US/Can don't seem to have it. Anyway digging through this (http://www.dslreports.com/forum/r273294 ... 0H-US-CAN-) thread, if you don't have it they came up with this (on page 7 if you want to read it there)
ok everyone, I have the procedure for re-instating the "Select Services" icon in the menu. This will work for the C610H add-on handsets you have where you notice that the menu looks different than the menu on the handset that came with the C610AIP system.

Get into the menu (right click silver 4-way navkey)

Type in *#7337#

Enter in the 15 digit string 52795 52281 52473

Press “ok” softkey on bottom right of screen.
This should give you access to a new menu that should allow you to do more as in the attached image (again taken from that thread).
thumb.jpg
Source, dslreports.

I seem to stand corrected! Please let us know if this addresses the issue!



VQ
Top
newuser
Just Passing Thru
Posts: 11
Joined: 03/03/2013

private call

Post by newuser »

Hi,
I have on "select services" menu "Next Call Anonymous" function.
but when I made anonymous call , caller ID is still displayed.
some people have same problem here:
http://www.dslreports.com/forum/r269054 ... ymousq-not

Thanks.
Top

Return to “Community Support”