caller Id

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
msao
Just Passing Thru
Posts: 7
Joined: 05/06/2010
ISP Name: xplornet
Computer OS: windows 7

caller Id

Post by msao »

When i call some one it comes up as private name and number
checked setting in my account, have set to show can you help with this please.
Top
User avatar
Jake
Technical Support
Posts: 2837
Joined: 10/18/2009

Re: caller Id

Post by Jake »

try dialling *98. It depends on your ATA though.
Top
msao
Just Passing Thru
Posts: 7
Joined: 05/06/2010
ISP Name: xplornet
Computer OS: windows 7

Re: caller Id

Post by msao »

tryed that did not work any other sugestions please
Top
Ice
Lightly Seasoned
Posts: 151
Joined: 01/21/2010

Re: caller Id

Post by Ice »

*82 is another one, isn't it? CallerID works properly for other calls they receive, right?

Can you tell us more about your setup - what software/softphone/hardware/router/etc are you using? There are lots of possibilities but let's start here... :)
Top
cu2o2o2
Lightly Seasoned
Posts: 227
Joined: 04/06/2010
SIP Device Name: Double-NAT PAP2T-NA
Firmware Version: 5.1.6 (LS)
ISP Name: Rogers Express with SB5101
Computer OS: Win7 32-bit for DV softphone
Router: WNR3500L behind DIR-615C1
Location: Brampton, ON

Re: caller Id

Post by cu2o2o2 »

msao wrote:tryed that did not work any other sugestions please
If you have a Linksys ATA, *68 removes caller id blocking on all of your outgoing calls.

;)
.

You agree to read my posts at your own risk.
Top
User avatar
Jake
Technical Support
Posts: 2837
Joined: 10/18/2009

Re: caller Id

Post by Jake »

cu2o2o2 wrote:
msao wrote:tryed that did not work any other sugestions please
If you have a Linksys ATA, *68 removes caller id blocking on all of your outgoing calls.

;)
I think *68 is the number I meant, *98 is voicemail isn't it. Opps :oops:
Top
FREEA_k
Just Passing Thru
Posts: 12
Joined: 02/20/2011
SIP Device Name: linksys pap2, pbxes, voxalot
ISP Name: cable
Computer OS: vista

Re: caller Id

Post by FREEA_k »

did u get it working???

just check caller id activation code ("CID Act Code:") in the regional tab, in my box it is *65

or even easy, in the user1 tab, just turn "Block CID Setting:" "No", "CID Setting:" "Yes"
and "CWCID Setting: Yes"
Top

Return to “Community Support”