cannot receive international calls

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
hpl912
Just Passing Thru
Posts: 6
Joined: 07/22/2011
SIP Device Name: Linksys PAP2T-NA
Firmware Version: 3.1.15(LS)
ISP Name: Bell
Computer OS: Win7 ultimate
Router: D-Link DIR-655

cannot receive international calls

Post by hpl912 »

when an international calls me to my fpl number, the other side says they only hear a busy tone...
however local calls can be received correctly. is there something i'm missing in the settings?
btw, its a call from asia to a montreal 438 fpl number.
User avatar
Jake
Technical Support
Posts: 2837
Joined: 10/18/2009

Re: cannot receive international calls

Post by Jake »

I know this won't help your problem but I get frequent calls from my family in the UK, so calls outside Canada do come through properly.

Maybe the busy signal is being generated from their end? Just as a thought, it might be making sure that they are dialling the right country access code.

For example, my Mum in the UK dials 00-1-613-366-XXXX where my friend in Australia has to dial 0011-1-613-366-XXXX

You probably have the right number, but it might be worth double checking with this site http://www.howtocallabroad.com/canada/ Use the drop down boxes in the "Not calling from the US or Canada?" form at the top and hit submit.
hpl912
Just Passing Thru
Posts: 6
Joined: 07/22/2011
SIP Device Name: Linksys PAP2T-NA
Firmware Version: 3.1.15(LS)
ISP Name: Bell
Computer OS: Win7 ultimate
Router: D-Link DIR-655

Re: cannot receive international calls

Post by hpl912 »

thanks for the reply but i'm pretty sure it was the right number (and we double chcked) that was dialed since i have a local landline and i was able to receive calls from the same person.
it must have something to do with FPL or some settings i missed? i just followed the setting guide in the stickies here though.
User avatar
Jake
Technical Support
Posts: 2837
Joined: 10/18/2009

Re: cannot receive international calls

Post by Jake »

The only other thing that springs to mind is which codec you are using. We had this here once before when our ATA was to to only use G729a. Changing the setting to use other codecs fixed this for us. Can't think of what else it might be, sorry.
hpl912
Just Passing Thru
Posts: 6
Joined: 07/22/2011
SIP Device Name: Linksys PAP2T-NA
Firmware Version: 3.1.15(LS)
ISP Name: Bell
Computer OS: Win7 ultimate
Router: D-Link DIR-655

Re: cannot receive international calls

Post by hpl912 »

do you mean i should change it to G729a or something else?