I use Linksys ATA for my freephone line. I have forgot my username & password.
So I want to reset the ATA. Can you please help me how to do it ?
Moreover, whenever I receive a call, my time on the phone goes 1 hour backward, if I have set it to the current Eastern Standard Time.
So please tell me what to do to fix this problem ?
Thank you in advance.
How to reset my Linksys ATA
-
monal
- Just Passing Thru
- Posts: 7
- Joined: 06/19/2012
- SIP Device Name: Linksys PAP2T
- Firmware Version: 5.1.6
- ISP Name: Bell Canada, Optical Fibre 16+
- Computer OS: Windows 7
- Router: Sagemcom Fast 2864
- Location: Toronto ON
-
Red89GT
- Active Poster
- Posts: 79
- Joined: 03/28/2010
- SIP Device Name: PAP2T-NA
- Firmware Version: DD-WRT v24-sp2
- ISP Name: Shaw Cable
- Computer OS: Win 7
- Router: Asus RT-N16
Re: How to reset my Linksys ATA
To factory reset do the following, but remember you will loose all your settings and will have to setup the device again.monal wrote:I use Linksys ATA for my freephone line. I have forgot my username & password.
So I want to reset the ATA. Can you please help me how to do it ?
pickup your phone and dial **** (four stars)
you should hear the IVR config menu.
then dial RESET# (73738#)
Login as admin -> advancedmonal wrote:
Moreover, whenever I receive a call, my time on the phone goes 1 hour backward, if I have set it to the current Eastern Standard Time.
So please tell me what to do to fix this problem ?
Thank you in advance.
Check your Primary/Secondary NTP Server under. System - Optional Network Configuration
and then check your Regional tab - Misc - make sure your time zone is correct
-
TheHardy
- ***Übergod***
- Posts: 1632
- Joined: 08/13/2011
- SIP Device Name: FPL PC softphone (buggy)
- Firmware Version: 3.0.3.0
- ISP Name: Telus Optik
- Computer OS: Win7
- Router: Actiontec V1000H
- Smartphone Model: none
- Location: Surrey, BC
times
Adjust not just your timezone, but see if there is a setting (tickbox/toggle) for DST there as well --- I do not have your device, but a lot of them have the provision for dealing with daylight or summer time changes ...
Hardy - Surrey, BC ~~ increasingly disgruntled FPL user ... comon, fix your stuff!
driver/webmaster - INCARTA Professional Delivery & Moving -- http://www.incarta.ca 604-594-7126
driver/webmaster - INCARTA Professional Delivery & Moving -- http://www.incarta.ca 604-594-7126
-
dibsmft
- *Go-To Guy*
- Posts: 651
- Joined: 05/11/2011
- SIP Device Name: Yealink T22 (SPA3102 GS286)
- Firmware Version: 7.60.0.110
- ISP Name: Bell-Aliant DSL
- Computer OS: Linux Mint
- Router: Speedstream 6520
- Smartphone Model: Google Nexus 5
- Android Version: 3.2.1
- Location: St. John's NL
Re: How to reset my Linksys ATA
[quote="Red89GT"]
To factory reset do the following, but remember you will loose all your settings and will have to setup the device again.
pickup your phone and dial **** (four stars)
you should hear the IVR config menu.
then dial RESET# (73738#)
[quote="monal"]
Actially the manual gives 73738 not 73738# but I doubt if it makes any difference. After the number enter "1 to confirm or * to cancel the operation" at the prompt.
If you only want to change the user configuration parameters then the "User Factory Reset" number is 877778 . In this case only the user changeable parameters are reset to factory values.
(Manual page 11)
To factory reset do the following, but remember you will loose all your settings and will have to setup the device again.
pickup your phone and dial **** (four stars)
you should hear the IVR config menu.
then dial RESET# (73738#)
[quote="monal"]
Actially the manual gives 73738 not 73738# but I doubt if it makes any difference. After the number enter "1 to confirm or * to cancel the operation" at the prompt.
If you only want to change the user configuration parameters then the "User Factory Reset" number is 877778 . In this case only the user changeable parameters are reset to factory values.
(Manual page 11)