Will my voice quality be affected majorly if my current RTP size is .080, and the ringwave form is TRAPEZOID? The reason for this setting is that I can still compromise and receive faxes without any problems. But just want to make sure that I don't sacrifice too much on voice quality.
(I understand that the default setting should be RTP .020, and ringwave type is SINUSOID)...
How important is RTP Size & Ringwave?
-
FONGO_steve
- Site Moderator
- Posts: 2131
- Joined: 07/16/2009
- SIP Device Name: Grandstream 286 & 701
- ISP Name: Worldline.ca
- Computer OS: Windows 7 Ultimate / Mac OS X
- Router: TR1043ND w/ DD-WRT Mega
- Smartphone Model: Galaxy S3
- Android Version: 4.0.4
- Location: Cambridge
Re: How important is RTP Size & Ringwave?
Ring type won't affect voice quality at all, just how the ATA sends the ringing voltage to the device attached.Pirate wrote:Will my voice quality be affected majorly if my current RTP size is .080, and the ringwave form is TRAPEZOID? The reason for this setting is that I can still compromise and receive faxes without any problems. But just want to make sure that I don't sacrifice too much on voice quality.
(I understand that the default setting should be RTP .020, and ringwave type is SINUSOID)...
RTP size is variable - if it works for you, then it'll work. 0.020 is the most widely used and problem free one, but if your connection will work with higher, then go for it!
Steve
Fongo
Development Support Specialist.
Fongo
Development Support Specialist.