no sound

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
pioneer12316
One Hit Wonder
Posts: 1
Joined: 06/07/2013
SIP Device Name: linksys
Firmware Version: 3.1.15
ISP Name: shaw cable
Computer OS: window 7
Router: shaw router

no sound

Post by pioneer12316 »

hi out going no sound or other end of the line sound cut in and out sometime , but sound from in come work fine . please help thanks
Top
navark
One Hit Wonder
Posts: 1
Joined: 06/07/2013

Re: no sound

Post by navark »

If I understood correctly, he has the same problem as I do. Incoming sound works fine I can hear the other end but they can't hear me, no outgoing sound. I have forwarded the port and I have a working microphone. Anyone has an idea how to fix this?
Top
division52
Just Passing Thru
Posts: 2
Joined: 06/07/2013
SIP Device Name: Cisco SPA122, FreePBX
Firmware Version: 1.3.1
ISP Name: Rogers
Computer OS: Windows XP
Router: DD-WRT v24-sp2

Re: no sound

Post by division52 »

I had the same issue. I had to go to my router and check the port forwards. If you have DHCP setup it is possible your ATA module's ip changed. This was the case with mine and I had to change the IP again in my router. Other option is to setup a DHCP reservation based on MAC address so this does not happen. Also I recommend if you haven't done so to change your QOS settings to give FPL bandwidth priority.

I am forwarding the following ports:

5060
Top

Return to “Community Support”