no caller ID display

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
cocotea
One Hit Wonder
Posts: 1
Joined: 07/27/2013
SIP Device Name: linksys PAP2T
Firmware Version: don't know
Computer OS: windows8
Router: 2wire gateway

no caller ID display

Post by cocotea »

I have been using FreePhoneLine for few years and have no problem until one day from about half an year ago. All of sudden I can't see the caller ID any more. In the beginning it will sometimes show some caller ID, then about 2weeks later, no more ID display. now only once a while, when I am talking on the phone and there is a incoming call, I might see that caller ID. This ha's been more than 6 weeks. I have tried different phone and nothing changed. I am always using linksys PAP2T as ATA. Please help and thanks a lot!
vq1
Quiet One
Posts: 31
Joined: 04/08/2011
SIP Device Name: SPA2102
ISP Name: Electronic Box
Computer OS: Windows 7
Router: DDWRT

Re: no caller ID display

Post by vq1 »

If you change your Proxy to voip2.freephoneline.ca, does this make any difference?


VQ
charettepa
Just Passing Thru
Posts: 14
Joined: 06/06/2010
SIP Device Name: PAP2T NA
Firmware Version: 5.1.6
ISP Name: Rogers Cable
Computer OS: Windows 7, XP, Ubuntu 10
Router: Asus Rt-N16 (DDWRT)

Re: no caller ID display

Post by charettepa »

i started having the same issue today
funny thing though

my 2 vista 350 phones have no display
but my 4 panasonic cordless phones work fine
this started just this morning

on 2 of the exact samephones

codec change??
User avatar
Fongo Support
Site Moderator
Posts: 1689
Joined: 01/01/2013

Re: no caller ID display

Post by Fongo Support »

charettepa wrote:i started having the same issue today
funny thing though

my 2 vista 350 phones have no display
but my 4 panasonic cordless phones work fine
this started just this morning

on 2 of the exact samephones

codec change??
Hi there,

If your PAP2T is setup exactly as per below link it should work with no issue.

http://forum.fongo.com/viewtopic.php?f=15&t=310

Thanks,
ak947
Just Passing Thru
Posts: 5
Joined: 12/10/2011
SIP Device Name: WRTP54G
Firmware Version: 3.1.17
ISP Name: Rogers
Router: Linksys WRTP54G

Re: no caller ID display

Post by ak947 »

After Dec 1, 2015, I can't see the caller ID anymore. Nothing has been changed on my router/ATA/modem. I am using linksys WRTP54G as ATA and Dlink DIR-816L as router. Please help me.Thanks a lot!