no caller ID display
-
- One Hit Wonder
- Posts: 1
- Joined: 07/27/2013
- SIP Device Name: linksys PAP2T
- Firmware Version: don't know
- Computer OS: windows8
- Router: 2wire gateway
no caller ID display
I have been using FreePhoneLine for few years and have no problem until one day from about half an year ago. All of sudden I can't see the caller ID any more. In the beginning it will sometimes show some caller ID, then about 2weeks later, no more ID display. now only once a while, when I am talking on the phone and there is a incoming call, I might see that caller ID. This ha's been more than 6 weeks. I have tried different phone and nothing changed. I am always using linksys PAP2T as ATA. Please help and thanks a lot!
-
- Quiet One
- Posts: 31
- Joined: 04/08/2011
- SIP Device Name: SPA2102
- ISP Name: Electronic Box
- Computer OS: Windows 7
- Router: DDWRT
Re: no caller ID display
If you change your Proxy to voip2.freephoneline.ca, does this make any difference?
VQ
VQ
-
- Just Passing Thru
- Posts: 14
- Joined: 06/06/2010
- SIP Device Name: PAP2T NA
- Firmware Version: 5.1.6
- ISP Name: Rogers Cable
- Computer OS: Windows 7, XP, Ubuntu 10
- Router: Asus Rt-N16 (DDWRT)
Re: no caller ID display
i started having the same issue today
funny thing though
my 2 vista 350 phones have no display
but my 4 panasonic cordless phones work fine
this started just this morning
on 2 of the exact samephones
codec change??
funny thing though
my 2 vista 350 phones have no display
but my 4 panasonic cordless phones work fine
this started just this morning
on 2 of the exact samephones
codec change??
-
- Site Moderator
- Posts: 1689
- Joined: 01/01/2013
Re: no caller ID display
Hi there,charettepa wrote:i started having the same issue today
funny thing though
my 2 vista 350 phones have no display
but my 4 panasonic cordless phones work fine
this started just this morning
on 2 of the exact samephones
codec change??
If your PAP2T is setup exactly as per below link it should work with no issue.
http://forum.fongo.com/viewtopic.php?f=15&t=310
Thanks,
-
- Just Passing Thru
- Posts: 5
- Joined: 12/10/2011
- SIP Device Name: WRTP54G
- Firmware Version: 3.1.17
- ISP Name: Rogers
- Router: Linksys WRTP54G
Re: no caller ID display
After Dec 1, 2015, I can't see the caller ID anymore. Nothing has been changed on my router/ATA/modem. I am using linksys WRTP54G as ATA and Dlink DIR-816L as router. Please help me.Thanks a lot!