Can't connect to login server

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
FWU
Just Passing Thru
Posts: 7
Joined: 11/28/2013

Can't connect to login server

Post by FWU »

I'm freephoneline user and use LinkSYS PAP2, it was working great until this evening.

the Registration State became "Can't connect to login server", i tried to search the solution from forums and download Linksys ATA Configuration Walk_v2_08_04_13.docx from http://forum.fongo.com/viewtopic.php?f=15&t=310

check one by one and modified "incorrect" one. reboot the device several times. but still can not connect to login server.

any help would be appreciated
User avatar
Fongo Support
Site Moderator
Posts: 1689
Joined: 01/01/2013

Re: Can't connect to login server

Post by Fongo Support »

FWU wrote:I'm freephoneline user and use LinkSYS PAP2, it was working great until this evening.

the Registration State became "Can't connect to login server", i tried to search the solution from forums and download Linksys ATA Configuration Walk_v2_08_04_13.docx from http://forum.fongo.com/viewtopic.php?f=15&t=310

check one by one and modified "incorrect" one. reboot the device several times. but still can not connect to login server.

any help would be appreciated
Hi there,

Please make sure that you entered the correct information: Sip user ID and SIP password

The sip server should be voip.freephoneline.ca

The registration expiry should be 3600.

Please check and let me know.

Thanks,
FWU
Just Passing Thru
Posts: 7
Joined: 11/28/2013

Re: Can't connect to login server

Post by FWU »

when you talk about "The sip server should be voip.freephoneline.ca", do you mean "Proxy:" column in section "Proxy and Registration" of "line 1"?
if so yes, the value is "voip.freephoneline.ca" and Register Expires is set to 3600

the only two parts what i have not touched is UID and PWD.
my UID is my phone#, and i forgot my pwd, so i did not change those two columns.

Could you help me to reset my pwd?

thanks for your help
User avatar
Fongo Support
Site Moderator
Posts: 1689
Joined: 01/01/2013

Re: Can't connect to login server

Post by Fongo Support »

FWU wrote:when you talk about "The sip server should be voip.freephoneline.ca", do you mean "Proxy:" column in section "Proxy and Registration" of "line 1"?
if so yes, the value is "voip.freephoneline.ca" and Register Expires is set to 3600

the only two parts what i have not touched is UID and PWD.
my UID is my phone#, and i forgot my pwd, so i did not change those two columns.

Could you help me to reset my pwd?

thanks for your help
Hi there,

To retrieve your SIP Settings, please login to your account at https://www.freephoneline.ca/login

Once you are logged in, please click on "Settings" then "SIP Settings", your VoIP Unlock Key credentials will be listed there.

Important: Please ensure that your 3rd party ATA is configured according to the FPL guidelines: http://support.freephoneline.ca/entries ... redentials

If you are unable to login, please open a support ticket for this issue:

http://support.fongo.com/anonymous_requests/new

Once you have the ticket#, please send me a PM:

http://forum.fongo.com/ucp.php?i=pm&mode=compose&u=7852

Thanks,
FWU
Just Passing Thru
Posts: 7
Joined: 11/28/2013

Re: Can't connect to login server

Post by FWU »

I did re-enter the pwd from freephoneline.ca, but no lucky

I did submit a request and Request# is 42398.

I tried to PM you but the msg still sit in outbox, should it in Sent Msg if has been successfully delivered?