Incoming calls not working
-
- One Hit Wonder
- Posts: 1
- Joined: 12/31/2013
Incoming calls not working
Hi all,
I have been using the GrandStream HT701 with the Fongo home service for a couple of months now, and today all of a sudden incoming calls stopped working. I tried hard restarting everything and no luck. I even tried plugging my GrandStream straight to my modem and no luck. Any suggestions? Incoming calls go straight to voicemail. I have checked if DND was ON or if call forwarding was on and both were off.
Thanks in advance all help is appreciated
I have been using the GrandStream HT701 with the Fongo home service for a couple of months now, and today all of a sudden incoming calls stopped working. I tried hard restarting everything and no luck. I even tried plugging my GrandStream straight to my modem and no luck. Any suggestions? Incoming calls go straight to voicemail. I have checked if DND was ON or if call forwarding was on and both were off.
Thanks in advance all help is appreciated
-
- One Hit Wonder
- Posts: 1
- Joined: 12/31/2013
- SIP Device Name: GRANDSTREAM
- ISP Name: ROGERS CABLE
- Computer OS: vista
- Router: rogers SMCD3GN
Re: Incoming calls not working
i have the same issue. waiting for fongo response
-
- One Hit Wonder
- Posts: 1
- Joined: 12/31/2013
- Computer OS: windows 8
Re: Incoming calls not working
I am having the same issue. Been with fongo for about 3 months and today all calls go directly to voicemail.
-
- Just Passing Thru
- Posts: 3
- Joined: 02/18/2013
- SIP Device Name: Obi100
- ISP Name: TekSavvy DSL
- Computer OS: WinXP home
- Router: thompson speedtouch 516
Re: Incoming calls not working
I'm having the same problem as of this morning. I'm using an OBI110 and it still says that the fongo account is registered, but only outgoing calls are working. Incoming straight to voicemail, and no VM indicator either.
Is this a fongo issue and nothing specific to my setup?
Is this a fongo issue and nothing specific to my setup?
-
- Just Passing Thru
- Posts: 3
- Joined: 02/18/2013
- SIP Device Name: Obi100
- ISP Name: TekSavvy DSL
- Computer OS: WinXP home
- Router: thompson speedtouch 516
Re: Incoming calls not working
Same for me. Starting this morning, all incoming calls to my fongo number go straight to voicemail. I'm using OBI110.
It this a problem on Fongo's side, as opposed to any setup on my side (I haven't changed any settings in a while)
It this a problem on Fongo's side, as opposed to any setup on my side (I haven't changed any settings in a while)
-
- Just Passing Thru
- Posts: 3
- Joined: 02/18/2013
- SIP Device Name: Obi100
- ISP Name: TekSavvy DSL
- Computer OS: WinXP home
- Router: thompson speedtouch 516
Re: Incoming calls not working
Same for me. Starting this morning, all incoming calls to my fongo number go straight to voicemail. I'm using OBI110.
It this a problem on Fongo's side, as opposed to any setup on my side (I haven't changed any settings in a while)
It this a problem on Fongo's side, as opposed to any setup on my side (I haven't changed any settings in a while)
-
- Quiet One
- Posts: 28
- Joined: 05/14/2013
- SIP Device Name: LG Nexus 4
- Firmware Version: 4.2.2
Re: Incoming calls not working
It's a problem on their end. Have a look at http://status.fongo.com/
-
- Just Passing Thru
- Posts: 4
- Joined: 12/16/2012
Re: Incoming calls not working
Yes i am having the same issue. I have to forward my landline number to my cell now. This sucks. I cannot even find the fongo customer service number anywhere
-
- Quiet One
- Posts: 28
- Joined: 05/14/2013
- SIP Device Name: LG Nexus 4
- Firmware Version: 4.2.2
Re: Incoming calls not working
If you have the fongo app you can forward the home phone to that too so it doesn't cost you anything
-
- One Hit Wonder
- Posts: 1
- Joined: 01/01/2014
- SIP Device Name: Grandstream HT701
- ISP Name: Teksavvy Cable
Re: Incoming calls not working
same issue just noticed today even with no config changes made to router, switches or Grandstream. Rebooted all devices today with no resulting fix. Based on the consensus here, this seems definitely a fongo server issue versus any local or end user configuration or defice issue.
-
- One Hit Wonder
- Posts: 1
- Joined: 01/01/2014
- SIP Device Name: SAP112
- Firmware Version: 1.3.2.XU
- ISP Name: Acanac
Re: Incoming calls not working
Change the proxy to voip.freephoneline.ca and that should fix the issue.
-
- Just Passing Thru
- Posts: 2
- Joined: 01/02/2014
Re: Incoming calls not working
Did anybody fix their issues. I still having some problems. I already unplug my ATA for 20 mins then still says "Invalid Password". Is there a way to reset the password?