My FPL phone has been working fine for a long time.
Started from today, if others call me, they can hear my voice, but I cannot hear theirs.
If I call them, the two way conversion is fine.
Any idea what's going on?
I'm using Linksys ATA, and I followed the document from other thread to set it up (refreshed it again, didn't help).
Thanks
Strange behavior - No income voice if others call me
-
- Just Passing Thru
- Posts: 3
- Joined: 02/27/2013
- SIP Device Name: Linksys 1001
- ISP Name: Cable
- Router: Cisco M10
-
- One Hit Wonder
- Posts: 1
- Joined: 01/03/2014
- SIP Device Name: PAP2T
- Firmware Version: 5.1.6.LS
- ISP Name: Teksavvy
- Computer OS: Windows7-64 bit
- Router: Linksys E3000 ddwrt
Re: Strange behavior - No income voice if others call me
Try this:
Login into the Voip Modem (ATA) interface, click Admin, click Advance view.
Click SIP. Under NAT Support parameter- set the following:
Send Resp to Src Port : YES
Stun Enable: YES
Stun Server: Stun.counterpath.com
or Stun.3cx.com
or Stunserver.org
or any valid stunserver
Click Save.
Good Luck!
Login into the Voip Modem (ATA) interface, click Admin, click Advance view.
Click SIP. Under NAT Support parameter- set the following:
Send Resp to Src Port : YES
Stun Enable: YES
Stun Server: Stun.counterpath.com
or Stun.3cx.com
or Stunserver.org
or any valid stunserver
Click Save.
Good Luck!