FPL not accepting incoming calls ?

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
Forum rules
cid
Just Passing Thru
Posts: 15
Joined: 02/22/2010
SIP Device Name: spa3102
Firmware Version: 5.1.10
ISP Name: Shaw Cable
Computer OS: Windows 7

Re: FPL not accepting incoming calls ?

Post by cid »

I had a similar issues where my pbx would always lose registration and i wouldn't get any incoming calls. I just sorted the problem out here: http://forum.fongo.com/viewtopic.php?f=8&t=15112

Basically, my system was refreshing the registration too quickly. I have corrected the issue by changing the expiry to 3600 seconds and its working now.

Hope that helps.

CiD
Top
TDelux
One Hit Wonder
Posts: 1
Joined: 02/21/2014
SIP Device Name: Cisco ATA112
Firmware Version: 1.3.2
ISP Name: Videotron (Cable)
Computer OS: Windows 7
Router: Dlink-815

Re: FPL not accepting incoming calls ?

Post by TDelux »

I have been having issues with one of the callers not hearing anything.
All started today.
Top
User avatar
Fongo Support
Site Moderator
Posts: 1689
Joined: 01/01/2013

Re: FPL not accepting incoming calls ?

Post by Fongo Support »

TDelux wrote:I have been having issues with one of the callers not hearing anything.
All started today.
Hi there,

Please see below:

http://forum.fongo.com/viewtopic.php?f=8&t=15094#p61182

You need to open a support ticket for this issue.

Thanks,
Top

Return to “Community Support”