Hello.
I am trying to run a D-Link DPH-540 phone with my Freephoneline account.
Dialing is OK but after the other person picks up the phone I hear three short beeps and no one hears a voice.
Please help .
D-Link DPH-540 WiFi phone not working.
-
- Tried and True
- Posts: 411
- Joined: 08/14/2014
- SIP Device Name: OBi110
- Firmware Version: 1.3.0 (Build: 2824)
- ISP Name: Telus
- Computer OS: Windows 7
- Router: Toastman Tomato
Re: D-Link DPH-540 WiFi phone not working.
To see if you are affected by FPL's NAT problem, try to temporarily use voip3.freephoneline.ca.
Once your testing is complete, switch back to your original server, and do not continue to use voip3.
If that solved the problem, it indicates your device is configured correctly. In that case, you should:
Open a ticket: http://support.fongo.com/anonymous_requests/new
Send Fongo Support a PM with the ticket number: http://forum.fongo.com/memberlist.php?m ... ile&u=7852
Once your testing is complete, switch back to your original server, and do not continue to use voip3.
If that solved the problem, it indicates your device is configured correctly. In that case, you should:
Open a ticket: http://support.fongo.com/anonymous_requests/new
Send Fongo Support a PM with the ticket number: http://forum.fongo.com/memberlist.php?m ... ile&u=7852
- marginal
- Active Poster
- Posts: 134
- Joined: 04/17/2010
- SIP Device Name: Linksys PAP2-NA
- Firmware Version: 3.3.14
- ISP Name: Acanac
- Computer OS: Ubuntu / XP
- Location: Montreal, Canada
- Contact:
Re: D-Link DPH-540 WiFi phone not working.
Thank you Mango but it didn't work.Mango wrote:To see if you are affected by FPL's NAT problem, try to temporarily use voip3.freephoneline.ca.
Once your testing is complete, switch back to your original server, and do not continue to use voip3.
If that solved the problem, it indicates your device is configured correctly. In that case, you should:
Open a ticket: http://support.fongo.com/anonymous_requests/new
Send Fongo Support a PM with the ticket number: http://forum.fongo.com/memberlist.php?m ... ile&u=7852
Same thing happens.
After the three short beeps the Wi-Fi phone hangs up by itself.
Here's a screen shot of its SIP configuration.
Thanks.
- marginal
- Active Poster
- Posts: 134
- Joined: 04/17/2010
- SIP Device Name: Linksys PAP2-NA
- Firmware Version: 3.3.14
- ISP Name: Acanac
- Computer OS: Ubuntu / XP
- Location: Montreal, Canada
- Contact:
And here are the debug statistics:
Wireless Network Status:
ESSID: XXXXXXXXXXX
BSSID: XXXXXXXXXXXXXXX
IP address: 192.168.X.XX
MAC address: XXXXXXXXXXXXXX
WL Info:
rssi is -51
noise is -98
No scan in progress.
current mac channel 6
target channel 6
Receive: good 908, bad 0
Transmit: good 2214, bad 0
RTP Stats:
igrRtpPkt:0
igrRtpByte:0
egrRtpPkt:0
egrRtpByte:0
egrRtpCumLostPkt:0
egrRtpDiscardPkt:0
igrRtpNoProfDiscPkt:0
igrRtcpPkt:0
egrRtcpPkt:0
egrRtpJitter:0
igrRtpLatency:0
PVE Stats:
peakHoldingTime:0
packetCount:0
addTailCount:0
reorderCount:0
overrunCount:0
duplicateCount:0
outOfRangeCount:0
tooLateCount:0
cantDecodeCount:0
ajcUnderrunCount:0
ajcDeleteCount:0
ajcRepeatCount:0
ajcResyncCount:0
ajcPhaseJitterCount:0
inactiveFrameCount:0
activeFrameCount:0
sidFrameCount:0
toneRelayCount:0
PVE State:
timer:0
expectedTimestamp:0
lastArrivalTime:0
lastArrTimeStamp:0
lastReleaseTimestamp:0
actualHoldTime:0
currentHoldTime:0
minHoldTimeTracker:0
maxHoldTimeTracker:0
releaseBump:0
underrunDuration:0
actionPendingTimer:0
currentDec:0
timerLastArrival:0
currentEnc:0
currentEncPktTime:0
currentEncPktSize:0
Thanks.
ESSID: XXXXXXXXXXX
BSSID: XXXXXXXXXXXXXXX
IP address: 192.168.X.XX
MAC address: XXXXXXXXXXXXXX
WL Info:
rssi is -51
noise is -98
No scan in progress.
current mac channel 6
target channel 6
Receive: good 908, bad 0
Transmit: good 2214, bad 0
RTP Stats:
igrRtpPkt:0
igrRtpByte:0
egrRtpPkt:0
egrRtpByte:0
egrRtpCumLostPkt:0
egrRtpDiscardPkt:0
igrRtpNoProfDiscPkt:0
igrRtcpPkt:0
egrRtcpPkt:0
egrRtpJitter:0
igrRtpLatency:0
PVE Stats:
peakHoldingTime:0
packetCount:0
addTailCount:0
reorderCount:0
overrunCount:0
duplicateCount:0
outOfRangeCount:0
tooLateCount:0
cantDecodeCount:0
ajcUnderrunCount:0
ajcDeleteCount:0
ajcRepeatCount:0
ajcResyncCount:0
ajcPhaseJitterCount:0
inactiveFrameCount:0
activeFrameCount:0
sidFrameCount:0
toneRelayCount:0
PVE State:
timer:0
expectedTimestamp:0
lastArrivalTime:0
lastArrTimeStamp:0
lastReleaseTimestamp:0
actualHoldTime:0
currentHoldTime:0
minHoldTimeTracker:0
maxHoldTimeTracker:0
releaseBump:0
underrunDuration:0
actionPendingTimer:0
currentDec:0
timerLastArrival:0
currentEnc:0
currentEncPktTime:0
currentEncPktSize:0
Thanks.