Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends
Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
marginal
Active Poster
Posts: 134 Joined: 04/17/2010
SIP Device Name: Linksys PAP2-NA
Firmware Version: 3.3.14
ISP Name: Acanac
Computer OS: Ubuntu / XP
Location: Montreal, Canada
Contact:
Post
by marginal » 04/26/2015
Hello.
I am trying to run a D-Link DPH-540 phone with my Freephoneline account.
Dialing is OK but after the other person picks up the phone I hear three short beeps and no one hears a voice.
Please help
.
Mango
Tried and True
Posts: 411 Joined: 08/14/2014
SIP Device Name: OBi110
Firmware Version: 1.3.0 (Build: 2824)
ISP Name: Telus
Computer OS: Windows 7
Router: Toastman Tomato
Post
by Mango » 04/26/2015
To see if you are affected by FPL's NAT problem, try to temporarily use voip3.freephoneline.ca.
Once your testing is complete, switch back to your original server, and do not continue to use voip3.
If that solved the problem, it indicates your device is configured correctly. In that case, you should:
Open a ticket:
http://support.fongo.com/anonymous_requests/new
Send Fongo Support a PM with the ticket number:
http://forum.fongo.com/memberlist.php?m ... ile&u=7852
marginal
Active Poster
Posts: 134 Joined: 04/17/2010
SIP Device Name: Linksys PAP2-NA
Firmware Version: 3.3.14
ISP Name: Acanac
Computer OS: Ubuntu / XP
Location: Montreal, Canada
Contact:
Post
by marginal » 04/27/2015
Thank you Mango but it didn't work.
Same thing happens.
After the three short beeps the Wi-Fi phone hangs up by itself.
Here's a screen shot of its SIP configuration.
Thanks.
marginal
Active Poster
Posts: 134 Joined: 04/17/2010
SIP Device Name: Linksys PAP2-NA
Firmware Version: 3.3.14
ISP Name: Acanac
Computer OS: Ubuntu / XP
Location: Montreal, Canada
Contact:
Post
by marginal » 04/27/2015
Wireless Network Status:
ESSID: XXXXXXXXXXX
BSSID: XXXXXXXXXXXXXXX
IP address: 192.168.X.XX
MAC address: XXXXXXXXXXXXXX
WL Info:
rssi is -51
noise is -98
No scan in progress.
current mac channel 6
target channel 6
Receive: good 908, bad 0
Transmit: good 2214, bad 0
RTP Stats:
igrRtpPkt:0
igrRtpByte:0
egrRtpPkt:0
egrRtpByte:0
egrRtpCumLostPkt:0
egrRtpDiscardPkt:0
igrRtpNoProfDiscPkt:0
igrRtcpPkt:0
egrRtcpPkt:0
egrRtpJitter:0
igrRtpLatency:0
PVE Stats:
peakHoldingTime:0
packetCount:0
addTailCount:0
reorderCount:0
overrunCount:0
duplicateCount:0
outOfRangeCount:0
tooLateCount:0
cantDecodeCount:0
ajcUnderrunCount:0
ajcDeleteCount:0
ajcRepeatCount:0
ajcResyncCount:0
ajcPhaseJitterCount:0
inactiveFrameCount:0
activeFrameCount:0
sidFrameCount:0
toneRelayCount:0
PVE State:
timer:0
expectedTimestamp:0
lastArrivalTime:0
lastArrTimeStamp:0
lastReleaseTimestamp:0
actualHoldTime:0
currentHoldTime:0
minHoldTimeTracker:0
maxHoldTimeTracker:0
releaseBump:0
underrunDuration:0
actionPendingTimer:0
currentDec:0
timerLastArrival:0
currentEnc:0
currentEncPktTime:0
currentEncPktSize:0
Thanks.