Hello,
I have a FreePhone Line number, and outgoing calls work fine.
When I use another phone, and dial the FreePhone Line number, I get routed to another persons number. I am dialling with 10-digits (NPA-NXX-XXXX) exactly as for the number that appears on my FPL account.
As another test, I use my FPL-phone to dial a mobile. Using the number displayed on the call-display, I call-back the FPL-number only to be routed to the wrong number.
Any ideas?
Thanks,
Doug.
Calling my number gets routed to someone else.
-
- Just Passing Thru
- Posts: 4
- Joined: 03/14/2012
- SIP Device Name: Cisco SPA3102
- Firmware Version: 3.3.6(GW)
- ISP Name: Teksavvy
- Computer OS: Windows XP
- Router: PFSense
-
- Technical Support
- Posts: 210
- Joined: 04/12/2012
- SIP Device Name: Grandstream HT-286
- Firmware Version: 1.1.0.45
- ISP Name: Bell Fibe 300/300
- Computer OS: Windows 7 Pro 64 bits
- Router: Bell hub 1000
- Smartphone Model: Moto E
- Android Version: Android 6.0
- Location: Montreal (QC)
Re: Calling my number gets routed to someone else.
Check if the "Follow Me" option is set to "Always Call Forward".
-
- Technical Support
- Posts: 2837
- Joined: 10/18/2009
Re: Calling my number gets routed to someone else.
It could be that your number was used by someone else before you and a setting is left in the system somewhere.
Log in online and check all the call forwarding options as mentioned above. If you don't see anything I would set something and test again to see if it makes a difference. If it does then just removing the number again might reset whatever is stuck. Failing that you will have to send in a support ticket for help as this sounds like a back end issue. https://support.fongo.com/anonymous_requests/new
Log in online and check all the call forwarding options as mentioned above. If you don't see anything I would set something and test again to see if it makes a difference. If it does then just removing the number again might reset whatever is stuck. Failing that you will have to send in a support ticket for help as this sounds like a back end issue. https://support.fongo.com/anonymous_requests/new
-
- Just Passing Thru
- Posts: 4
- Joined: 03/14/2012
- SIP Device Name: Cisco SPA3102
- Firmware Version: 3.3.6(GW)
- ISP Name: Teksavvy
- Computer OS: Windows XP
- Router: PFSense
Re: Calling my number gets routed to someone else.
You guys are geniuses. I disabled "Follow-Me" and the phone rings now.
I cannot see what My Follow-Me settings were, but I thought I had it setup to only forward after 5-rings. That said, the follow-me-number was an old, old number, that i guess was re-assigned to the poor guy I kept ringing.
Thanks for the help!
I cannot see what My Follow-Me settings were, but I thought I had it setup to only forward after 5-rings. That said, the follow-me-number was an old, old number, that i guess was re-assigned to the poor guy I kept ringing.
Thanks for the help!