Caller id is not completely working

Have a question or problem with your Fongo application? This forum is the place to get help from both staff and fellow community members.
Fongo recommends Fongo Home Phone for a fully supported Home Phone system for only $4.95/mo
gershe
Just Passing Thru
Posts: 4
Joined: 12/18/2012
SIP Device Name: Linksys/PAP2T-5.1.6(LS)
Firmware Version: 5.1.6
ISP Name: TekSavvy
Computer OS: Windows 7
Router: DLink DIR- 655

Caller id is not completely working

Post by gershe »

My caller id is not working. When I get a call, I can see the phone number but not the name of the caller.
User avatar
Liptonbrisk
Technical Support
Posts: 3440
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 11 Pro
Router: Asuswrt-Merlin & others

Re: Caller id is not completely working

Post by Liptonbrisk »

Fongo services don't perform Caller ID name (CNAM) lookups.

CNAM lookups are dependent upon the service provider.

Freephoneline doesn't do CNAM (Caller ID Name) lookups (I.E., Freephoneline doesn't lookup the name of the caller, using the incoming phone number, in an external database). Unless CNAM is being sent by incoming caller's carrier, which often is not the case with cellular calls (I think Rogers is an exception), only the phone numbers are going to appear. CNAM lookups cost money, and for the price paid, Freephoneline isn't going to do CNAM lookups.

So, with an incoming call to your Freephoneline #, an incoming phone number will appear on your phone's Caller Id display, but a name only shows if that info is also sent by the provider. Other VoIP services typically charge a fee per call to do a lookup in a CNAM database (phone number is queried for a name in a database). Freephoneline doesn't offer that option. If CNAM info is passed on by the provider, Freephneline will display CNAM.

Freephoneline supports outbound and inbound CNAM.
But Freephoneline will not do CNAM lookups (which cost money).

If you've entered names for the specific incoming caller numbers in your phone's (if your handset supports saving names) contact list, then names should appear on your phone's display when incoming calls occur.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at http://forum.fongo.com/viewforum.php?f=15.
gershe
Just Passing Thru
Posts: 4
Joined: 12/18/2012
SIP Device Name: Linksys/PAP2T-5.1.6(LS)
Firmware Version: 5.1.6
ISP Name: TekSavvy
Computer OS: Windows 7
Router: DLink DIR- 655

Re: Caller id is not completely working

Post by gershe »

Thank you for your detailed explanation!
User avatar
Liptonbrisk
Technical Support
Posts: 3440
Joined: 04/26/2010
SIP Device Name: Obihai 202/2182, Groundwire
Firmware Version: various
ISP Name: FTTH
Computer OS: Windows 11 Pro
Router: Asuswrt-Merlin & others

Re: Caller id is not completely working

Post by Liptonbrisk »

You’re welcome.
Please do not send me emails; I do not work for nor represent Freephoneline or Fongo. Post questions on the forums so that others may learn from responses or assist you. Thank you. If you have an issue with your account or have a billing issue, submit a ticket here: https://support.fongo.com/hc/requests/new. Visit http://status.fongo.com/ to check FPL/Fongo service status. Freephoneline setup guides can be found at http://forum.fongo.com/viewforum.php?f=15.